Slide Mounting Media
Electron Microscopy Sciences SEM Mount Hitachi M4 1" Plain Surface, 1/4" height, Aluminum
Hitachi cylinder mount has a M4 tapered hole with female thread. Made from lathe finished ultra-pure aluminum. M4 tapered hole.
Head: 1"
Height: 6 mm
Alban Scientific Inc Permaslip Liquid Slide Mounting Medium, 8 oz
Permaslip Liquid Slide Mounting Medium, 8 oz.
Electron Microscopy Sciences Entellan Rapid Mounting Media 500 ML
Entellan is a rapid mounting media for microscopy. It can be used for long life preparations, without bubble formation at high ambient temperatures. Also for all dehydrated microscopic preparations. Cure time is 20 minutes at room temperature. It is colorless with an acid number less than 2.50 and a R.I. ND20 approx 1.49-1.5. (Contains xylene).
Electron Microscopy Sciences Technovit H7100 – GMA kit
Technovit H7100 – GMA kit consists of: 500 ml Glycol Methacrylate monomer, 5 x 0.6g packs Hardener I, 40 ml Hardener II; Technovit Glycol Methacrylate embedding kits developed by Kulzer in Germany are the most convenient to use and offers the best embedding results. Kits give better results offering improved morphology and allows for 1 micron serial sectioning. olymerization temperature never exceeds 40 degree C, which makes either kit a potential choice for enzyme histochemistry. Technical Note: GMA resin-based products (Technovit 7100, 8100) should not be used when epoxy removal from specimens is required. There is no known method of GMA epoxy removal (including methoxide) that does not effectively render specimens unusable. Instead, MMA resin-based products such as Technovit 9100 should be selected.
Sigma Aldrich Fine Chemicals Biosciences fluoroshieldTM with DAPI h
fluoroshield with DAPI is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This mounting medium is fortified with DAPI which is a counterstain for DNA. for use in in situ hybridization techniques or other methods where fluorescence of DNA staining is required. DAPI excites at 360 nm and emits at 460 nm producing a blue fluorescence. RNA is also stained with DAPI.
Electron Microscopy Sciences EMbed-812 kit, 1 kit
Replacement for the discontinued Epon-812. Produces the same results in terms of preservation, handling, sectioning, and staining as the old Epon-812. Kit consists of 450 ml EMbed-812, 450 ml DDSA; Specially Distilled, 450 ml NMA, and *50 ml DMP-30. *Please note that wherever DMP-30 is listed as the accelerator in our embedding media kits you have the option to use BDMA in place of it. BDMA is less viscous, has a longer shelf life, and offers better penetration (it should be noted, however, that in order to achieve the optimum results when using BDMA in place of DMP-30 you must vary the amount. DMP-30: 1.5-2%; BDMA: 2.5-3%).
Sigma Aldrich Fine Chemicals Biosciences Duolink(R) In Situ Mounting Medium with DAPI | 5ML
Duolink(R) In Situ Mounting Medium with DAPI | 5ML
Ibidi USA Mounting Medium, 15 ml
ibidi Mounting Medium is a glycerol-based, non-hardening mounting medium optimized for fluorescence microscopy. The dropper bottle is ideal for exact dispensing into channels or open wells such as in the ibidi µ-Slides and µ-Dishes. 15 ml
Electron Microscopy Sciences Histo-Mount 100 ML
A mixture of xylene - mixed isomers and non hazardous ingredients to offer a very good synthetic mountant. Once dried the refractive index is 1.58.
Sigma Aldrich Fine Chemicals Biosciences Eukitt(R) Quick-hardening mounting medium for microscopy | 25608-33-7 | MFCD00145620 | 500ML
Eukitt(R) Quick-hardening mounting medium for microscopy | 25608-33-7 | MFCD00145620 | 500ML
Polysciences, Inc. Poly-Mount Xylene, 120 mL
Xylene based routine coverslipping medium for histology and cytology slides. This acrylic medium provides superior optical clarity. Poly-Mount Xylene is also recommended for automated coverslipping instruments that use glass coverslips. It contains an anti-fade agent to prevent fading and yellowing with long term storage. Dries quickly for viewing, storage, and filing.